Product Description

Luminous ink can be irradiated in sunlight or light absorption after 10-30 minutes, will absorb the light energy is stored in the fine particles into the crystal, the crystal can be light in the dark more than 10 hours. The product chemical stability, absorption, optical storage, light-emitting process can be repeated, the service life of 10 years. Such products non-toxic, non-radioactive, processing screen printing process produces no harmful substances.

Caution:

1. clean the screen surface, not dusty debris.
2. be sure to stir well before use, not grinding.
3. In the screen before printing a white base to increase brightness.
4. emissive layer thickness should be greater than 100um. When the thickness of 150um, its best light.
5. ink viscosity according to usage, add dilution water to be adjusted to facilitate the appropriate screen.
6. 100-200 mesh screen to select the appropriate screen. The larger the aperture screen, get the better.
7. print the number of at least 2-3 times better. Screen the number of small, thick enough, light can not reflect the effect of
Years, so the thickness of a luminous glow, highlighting the fundamental guarantee.
8. any time do not use additives, heavy metal compounds, try to avoid using metal containers and gold
An agitator to stir the ink on the luminous ground.
9. luminous ink long time without use, precipitation phenomena occur, can still be used after mixing, will not affect its fat
Light effect.

The use of ink:

1. ink after printing: natural drying surface dry for 15-20 minutes, 4-6 hours of hard work.
2. Printing: silk screen, printing, coating
3. Features: ink dry completely, showing a very good ink adhesion, scratch resistant, anti-sticky.
4. Application: PET, ABS, PS, PC, PMMA, PP treated surface, such as surface and fuel injection. .
5. protect the luminous layer: the surface of the luminous layer of fine particles, long-term exposure in the green tea, you need to cover